Brand: SolarEdge
Product code: AEW-01783
SolarEdge Power Management and Climate Sensor Package <250A AC Supply
SolarEdge power management package for 3-phase systems under 250A grid supply: SE-WND-3Y400-MB-K2 energy meter, three 250A current transformers and an environmental sensor, for export limitation and site monitoring.
£1,401.55 inc. VAT
£1,167.96 exc. VAT
Out of stock
This package gives a 3-phase SolarEdge installation under 250A grid supply the metering needed for export limitation and site monitoring. It is built around the SolarEdge SE-WND-3Y400-MB-K2 energy meter, a UK-market Modbus meter wired to SolarEdge's Control and Communication Gateway or inverter, together with three SE-ACT-0750-250 current transformers rated 250A each (one per phase, 2.4m lead). The meter reads 400V line-to-line / 230V line-to-neutral at 48-62Hz over an operating range of 320-460V, communicates over RS485 at a fixed 120Ω termination, and is accurate to ±1.0% of rated CT current. It fits a standard electrical panel (85 x 153 x 38mm, 310g, DIN rail or wall mount), operates from -40 to 75°C, and meets the UK's ENA G100 export limiting scheme. The package also includes a SolarEdge environmental sensor for climate monitoring.
Specifications
Kit Contents
| Energy meter | 1 x SE-WND-3Y400-MB-K2 |
|---|---|
| Current transformers | 3 x SE-ACT-0750-250 (one per phase) |
Electrical Service
| Nominal Voltage Range - Line to Line | 400 Vac |
|---|---|
| Nominal Voltage Range - Line to Neutral | 230 Vac |
| Operating Voltage Range - Line to Line | 320-460 Vac |
| AC Frequency | 48-62 Hz |
| Grids Supported | Single Phase (L/N/PE); Three Phase (L1/L2/L3/N/PE) |
| Power Consumption (typ.) | 1.8 W |
Current Transformer
| SE-ACT-0750-250 Rated RMS Current | 250 A |
|---|---|
| CT Lead Wire Length | 2.4 m |
Communication
| Supported Interfaces | RS485 |
|---|---|
| Response Time | 1 sec (max) |
| Default Device ID (Modbus) | 2 |
| RS485 Line Termination | 120 Ω |
Accuracy
| 1% - 100% of Rated CT Current | ±1.0% |
|---|
Installation
| Meter Dimensions (H x W x D) | 85 x 153 x 38 mm |
|---|---|
| Meter Weight | 310 g |
| Operating Temperature Range | -40 to 75 °C |
| Mounting Type | DIN Rail / Wall mount |
Standard Compliance
| Export Limiting Scheme | Engineering Recommendation G100, Issue 1 Amendment 1 2017 by ENA London UK |
|---|
Documents and datasheets
Datasheets
SolarEdge Energy Meter with Modbus Connection SE-WND-3Y400-MB-K2, 3-Phase 250A CT set, with environmental sensor — Datasheet
PDF · 871 kB
Customer reviews
No reviews yet.
Be the first to tell other shoppers what you think.